You may have heard of reboot bootloader if you are an advanced Android user or want to customize your phone. But do you know what this command means and how to use it? In this article we will explain to you what the reboot bootloader , what it is for and how to access it.
What is bootloader reboot?
This is a program that runs when the phone starts up and loads the operating system into RAM. The bootloader is therefore essential for the operation of the phone.
Bootloader mode , also called download or fastboot mode , is a special mode that allows you to communicate with the bootloader and send it commands. bootloader mode to:
Unlock the bootloader , which allows flashing custom ROMs or recoveries.
Flash the phone's firmware, that is, the different partitions that make up the operating system, like system, radio, recovery, etc.
Perform a phone diagnosis or troubleshoot startup issues.
Good to know: It is also possible to reboot your PC
How to access the reboot bootloader?
There are two ways to access the reboot bootloader : directly from the phone or using commands from your PC.
Access the reboot bootloader from the phone
To access the reboot bootloader from the phone, you must first completely turn off the device. Then, you must press a specific key combination depending on the phone model. Here are some examples :
Nexus and development devices
Press and hold volume and power power supply When the Google Home screen appears, release them.
Samsung devices
Press and hold the volume down and power supply buttons at the same time. When the Samsung screen appears, release them.
Press and hold the volume down and power supply buttons at the same time until you see the Huawei logo.
If you have successfully entered bootloader , you should see a screen with information about your phone and boot options. You can navigate between options with the volume buttons and select with the power power supply .
Access the reboot bootloader from the PC
To access the reboot bootloader from the PC, you must first install the ADB ( Android Debug Bridge ) and fastboot tools on your computer. These tools allow you to communicate with your phone via a USB connection. You can download them here: https://developer.android.com/studio/releases/platform-tools
Next, you need to enable USB debugging mode on your phone. To do this, go to settings, then “ About phone ” and tap “ Build number ” 7 times. You should see a message that you have become a developer. Then go back to Settings and go to “ Developer Options ”. USB Debugging option .
Finally, you need to connect your phone to your PC with a USB cable and open a command prompt. Type the following command:
adb reboot bootloader
Your phone should reboot into bootloader .
Here are some frequently asked questions about the reboot bootloader :
Does reboot bootloader erase phone data?
No, the reboot bootloader does not erase data from the phone. This is simply a boot mode that provides access to the bootloader . On the other hand, some operations you can perform in bootloader , such as unlocking or flashing firmware, may result in data loss. It is therefore advisable to make a backup before proceeding.
No, the bootloader reboot does not void the phone's warranty. This is a native Android feature that does not modify the operating system. On the other hand, certain operations that you can perform in bootloader , such as unlocking or flashing firmware, may void the phone's warranty. It is therefore advisable to check your manufacturer's warranty conditions before proceeding.
Is the reboot bootloader dangerous for the phone?
No, the bootloader reboot is not dangerous for the phone. This is a native Android feature that does not modify the operating system. On the other hand, some operations that you can perform in bootloader , such as unlocking or flashing firmware, can be risky for the phone. It is therefore advisable to follow the instructions carefully and not interrupt the process.
How to exit bootloader reboot?
To exit the bootloader reboot , simply select the “Start” or “Reboot system now” option in the bootloader . Your phone should restart normally.
How do I know if my bootloader is locked or unlocked?
To find out if your bootloader is locked or unlocked, simply enter bootloader and look at the lock status. If you see “Device is LOCKED” or a closed padlock, this means your bootloader is locked. If you see “Device is UNLOCKED” or an open padlock, this means your bootloader is unlocked.
Use the adb command: From the command-line, type adb reboot bootloader . Use a key combination: Determine the key combination for your device. For a table of Fastboot key combinations, see Fastboot key combinations.
Use the adb command: From the command-line, type adb reboot bootloader . Use a key combination: Determine the key combination for your device. For a table of Fastboot key combinations, see Fastboot key combinations.
After the reboot, the device loads a very basic text interface instead of the normal Android interface you normally use. The Recovery Mode screen will typically include some information about your device and version of Android along with a number of troubleshooting and repair options.
Press and hold the power and volume down buttons until a load screen appears. Use the volume buttons to go down the list and select “Recovery mode.” Press the power button. After the phone restarts, use the volume buttons again to select “Wipe data/factory reset.”
With your Android device on, long press the power button. Tap the Power off option. When your device is turned off completely, move to the next step. Hold the volume down and power buttons simultaneously to enter the bootloader menu, sometimes called Fastboot Mode.
REBOOT TO BOOTLOADER – Restarts the phone and boots directly into the Bootloader. BOOT TO DOWNLOAD MODE – Boots the phone directly to Download mode. BOOT TO RECOVERY MODE – Boots the phone directly to Recovery mode. POWER DOWN – Turns the phone off.
When you reboot your phone or tablet into bootloader mode, nothing gets deleted from your device. That is because the bootloader itself does not perform any actions on your phone. It is you who decides what to install with the bootloader mode, and then it depends if doing that action will wipe off your data.
Fastboot mode lets you flash and change files on your device using some simple lines of code. To fastboot, you need to switch your Android device to fastboot mode. Please know that the process may not be the same for every device. Connect the phone to your computer via a USB cable.
Press and hold your Android device's Power button and the Volume Down key for at least 5 seconds or until the screen shuts down. Release the buttons once you see the screen lighting up again. Instead of the usual welcome screen, a black screen will appear showing a list of text options.
Press-and-hold the Power button, or Power + Volume Up, to find the power off menu. Alternatively, to force a reboot, hold that button(s) until it restarts on its own. If your device has a battery you can remove, doing that will force a shutdown. Hold the Power button to start back up.
Unlocking the Bootloader allows you to install custom firmware on your Android phone and gives you full access privileges to make modifications to the phone. Such modifications could involve changing some of the pre-loaded software, or could even include replacing the entire operating system.
A bootloader is a program whose role is to find and launch an application upon system (e.g. raspberry pi) startup. Startup code (crt0) is the code that sets up the runtime environment for an application. E.g. this is the one that initializes the various parts of memory (e.g. initializes .
To boot fastboot mode, press Volume Down + Power Buttons concurrently for 3-4 seconds. Turn on the fastboot mode by pressing the volume up key only. ADB fastboot commands will let you restart your Android device into Bootloader mode or fastboot.
Windows 11, 10 & 8: Press the power icon in the Start menu, then select Restart. Windows 7 and Vista: Select the small arrow in the Start menu, then select Restart. You can also restart your PC from Ctrl+Alt+Del, or with the shutdown /r command.
You can reboot a system by using either the init command or the reboot command. The system is always running in one of a set of well-defined run levels. Run levels are also referred to as init states because the init process maintains the run level. The init command can be used to initiate a run level transition.
This command will let you reboot your device back into the bootloader/fastboot mode. To make the fastboot command work, your phone should be in fastboot mode. You can use the ADB reboot bootloader command to perform the task.
Introduction: My name is Stevie Stamm, I am a colorful, sparkling, splendid, vast, open, hilarious, tender person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.